Ford Fusion Hybrid (2014 year). Manual - part 70

1

2

3

4

5

E75442

14.

Remove the jack and fully tighten the
lug nuts in the order shown.  See
Technical Specifications (page
284).

Stowing the flat tire

You can stow the full-size road wheel in
the spare tire compartment.

1.

Lift the carpeted wheel cover at an
angle to access the spare tire
compartment.

2. Place the wheel in the spare tire well

with the valve stem facing down. Use
the mini-spare bolt to secure the wheel
through one of the lug holes.

3. Place the jack, tools and foam block

back into the spare tire compartment.

4. Replace the carpeted wheel cover.

E146026

283

Wheels and Tires

TECHNICAL SPECIFICATIONS

Wheel Lug Nut Torque Specifications

WARNING

When a wheel is installed, always remove any corrosion, dirt or foreign materials
present on the mounting surfaces of the wheel or the surface of the wheel hub,
brake drum or brake disc that contacts the wheel. Make sure that any fasteners

that attach the rotor to the hub are secured so they do not interfere with the mounting
surfaces of the wheel. Installing wheels without correct metal-to-metal contact at the
wheel mounting surfaces can cause the wheel nuts to loosen and the wheel to come off
while your vehicle is in motion, resulting in loss of control.

Ib-ft (Nm)

*

Bolt size

100 (135)

M12 x 1.5

*

Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford

recommended replacement fasteners.

Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any
wheel disturbance (such as tire rotation, changing a flat tire, wheel removal).

E145950

Wheel pilot bore

A

Inspect the wheel pilot bore and
mounting surface prior to installation.
Remove any visible corrosion or loose
particles.

284

Wheels and Tires

ENGINE SPECIFICATIONS

2.5L engine

2.0L EcoBoost

engine

1.6L EcoBoost

engine

1.5L EcoBoost

engine

Engine

152

122

98

92

Cubic inches

Minimum 87

octane

Minimum 87

octane

Minimum 87 octane

Minimum 87

octane

Required

fuel

9.7:1

9.3:1

10.0:1

10.0:1

Compression

ratio

0.049-0.053

in. (1.25-1.35

mm)

0.027-0.031 in.

(0.70-0.80

mm)

0.027-0.031 in.

(0.70- 0.80 mm)

0.025-0.029 in.

(0.65-0.75 mm)

Spark plug

gap

Drivebelt Routing

 (If Equipped)

1.5L engine

E167586

1.6L engine

E161372

2.0L and 2.5L engines

E161383

A

B

A. Long drivebelt is on first pulley groove

closest to engine

B. Short drivebelt is on second pulley

groove farthest from engine

285

Capacities and Specifications

MOTORCRAFT PARTS

2.5L Engine

2.0L EcoBoost

Engine

1.6L EcoBoost

Engine

1.5L EcoBoost

Engine

Component

FA-1912

Air filter element

1

FL-910S

Oil filter

2

BXT-96R-500

Battery

BXT-96R-590

SP-530

SP-537

SP-532

SP-539

Spark plugs

3

FP-71

Cabin air filter

WW-2700 (driver side)

Windshield wiper
blade

WW-2601 (passenger side)

1

 Failure to use the correct air filter element may result in severe engine damage. The

customer warranty may be void for any damage to the engine if the correct air filter
element is not used.

2

 Only use the specified replacement oil filter. The use of a non-specified oil filter can

result in engine damage.

3

 For spark plug replacement, see an authorized dealer. Replace the spark plugs at the

appropriate intervals.  See Scheduled Maintenance (page 426).

Note: Replace the spark plugs with ones that meet Ford material and design specifications
for your vehicle, such as Motorcraft or equivalent replacement parts. Your warranty may
be void for any damage to the engine if such spark plugs are not used.

286

Capacities and Specifications