|
|
E142443 The system uses radar sensors which are If the system detects a degraded When the blockage is removed, the system • when at least two objects are detected • turn the ignition from on to off, then If the blockage is still present after the key Reasons for messages being displayed Clean the fascia area in front of the radar or remove the obstruction. The radar surface is dirty or obstructed Drive normally in traffic for radar to detect passing vehicles so it can clear the blocked state. The radar surface is not dirty or No action required. The system automatically resets to an unblocked state once the rainfall or snowfall rate decreases or stops. Do not use BLIS or cross traffic alert in these conditions. Heavy rain- fall/snow- fall inter- feres with the radar signals System Limitations The BLIS and cross traffic alert systems The following are other situations that may • Certain maneuvering of vehicles • Vehicles passing through the blind zone • When several vehicles forming a The following are other situations that may • Adjacently parked vehicles or objects • Approaching vehicles passing at 191 Driving Aids |