Ford Fusion Hybrid (2014 year). Manual - part 20

Heads Up Display

(If Equipped)

E156133

A red beam of lights will
illuminate on the windshield in
certain instances when using

adaptive cruise control and/or the collision
warning system. It will also illuminate
momentarily when you start your vehicle
to make sure the display works.

High Beam

It will illuminate when you switch
the high beam headlamps on. It
will flash when you use the

headlamp flasher.

Hood Ajar

E159324

Displays when the ignition is on
and the hood is not completely
closed.

Lane Keeping Aid

(If Equipped)

E144813

Illuminates when the lane
keeping system is activated.

Low Fuel Level

It will illuminate when the fuel
level is low or the fuel tank is
nearly empty. Refuel as soon as

possible.

Low Tire Pressure Warning

It will illuminate when your tire
pressure is low. If the lamp
remains on with the engine
running or when driving, check

your tire pressure as soon as possible.

It will also illuminate momentarily when
you switch the ignition on to confirm the
lamp is functional. If it does not illuminate
when you switch the ignition on, or begins
to flash at any time, have the system
checked by your authorized dealer.

Parking Lamps

It will illuminate when you switch
the parking lamps on.

Powertrain Fault

Illuminates when a powertrain
or an AWD fault has been
detected. Contact your

authorized dealer as soon as possible.

Service Engine Soon

If the service engine soon
indicator light stays illuminated
after the engine is started, it

indicates that the On Board Diagnostics
system (OBD) has detected a malfunction
of the vehicle emissions control system.
Refer to On board diagnostics (OBD) in
the Fuel and Refueling chapter for more
information about having your vehicle
serviced. See Emission Control System
(page 147).

If the light is blinking, engine misfire is
occurring which could damage your
catalytic converter. Drive in a moderate
fashion (avoid heavy acceleration and
deceleration) and have your vehicle
serviced immediately.

Note: Under engine misfire conditions,
excessive exhaust temperatures could
damage the catalytic converter or other
vehicle components.

Instrument Cluster

The service engine soon indicator light
illuminates when the ignition is first turned
on prior to engine start to check the bulb
and to indicate whether the vehicle is ready
for Inspection/Maintenance (I/M) testing.

Normally, the service engine soon light will
stay on until the engine is cranked, then
turn itself off if no malfunctions are
present. However, if after 15 seconds the
service engine soon light blinks eight times,
it means that the vehicle is not ready for
I/M testing. See Emission Control
System (page 147).

Stability Control

E138639

It will flash when the system is
active. If it remains illuminated
or does not illuminate when you

switch the ignition on, this indicates a
malfunction. During a malfunction the
system will switch off. Have the system
checked by your authorized dealer
immediately. See Using Stability
Control (page 166).

Stability Control Off

It will illuminate when you switch
the system off. It will go out
when you switch the system

back on or when you switch the ignition
off. See Using Stability Control (page
166).

Trunk Ajar

E159323

Displays when the ignition is on
and the trunk is not completely
closed.

AUDIBLE WARNINGS AND
INDICATORS

Key in Ignition Warning Chime

Sounds when you open the driver's door
and you have left the key in the ignition
with it in the off or accessory position.

Keyless Warning Alert

(If Equipped)

Chirps the horn twice when you exit the
vehicle with the intelligent access key and
the keyless vehicle is in RUN, indicating the
vehicle is still on.

Headlamps On Warning Chime

Sounds when you remove the key from the
ignition and open the driver's door and you
have left the headlamps or parking lamps
on.

Parking Brake On Warning Chime

Sounds when you have left the parking
brake on and drive your vehicle. If the
warning chime remains on after you have
released the parking brake, have the
system checked by your authorized dealer
immediately.

Instrument Cluster

GENERAL INFORMATION

WARNING

Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that

you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any handheld device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.

Note: Your vehicle may or may not be
equipped with all the messages listed in this
chapter. Your vehicle will not display
messages of systems it is not equipped with.

Various systems on your vehicle can be
controlled using the information display
controls on the steering wheel.
Corresponding information is displayed in
the information display.

Information Display Controls
(Type 1 and Type 2)

E144637

•

Press the up and down arrow buttons
to scroll through and highlight the
options within a menu.

•

Press the right arrow button to enter a
sub-menu.

•

Press the left arrow button to exit a
menu.

•

Press and hold the left arrow button at
any time to return to the main menu
display (escape button).

•

Press the OK button to choose and
confirm settings or messages.

You can access the menu using the
information display control.

Note: Some options may appear slightly
different or not at all if the items are
optional.

Trip 1 and 2

Trip Odometer

Trip Timer

Fuel Used

Average Fuel

Information Displays

Trip 1 and 2

All Values

Outside Temperature

•

Resetting the Trip Computer — Press and hold OK on the current screen to reset the
respective trip, distance, time and fuel information.

•

Trip Odometer — Registers the distance of individual journeys.

•

Trip Timer — timer stops when the vehicle is turned off and restarts when the vehicle
is restarted.

•

Fuel Used — shows the amount of fuel used for a given trip.

•

Average Fuel — shows the average fuel economy for a given trip.

•

All Values — Shows all trip values.

•

Outside Temperature — Shows the outside air temperature.

Fuel Economy

Distance to E

Inst Fuel Econ

Long Term Average Fuel

Fuel History

All Values

Note: You can reset your average fuel
economy by pressing and holding the OK
button on the left hand steering wheel
controls.

Information

Available Auto Start-Stop messaging will provide details
about what is happening with your system. See Informa-
tion Messages (page 93).

Auto Stop/Start

MyKey

All active warnings will display first if applicable. The
system check menu may appear different based upon
equipment options and current vehicle status. Use the up/
down arrow buttons to scroll through the list.

System Check

Information Displays

Content .. 18 19 20 21 ..