|
|
4. Press 3 • 4 to store the second personal code. 5. The doors will again lock then unlock to confirm programming of the To store a third personal code: 1. Enter the factory set code. 2. Within five seconds press 1 • 2 on the keypad to enter the programming mode. 3. Enter a third personal 5-digit code. Each number must be entered 4. Press 5 • 6 (or 7 • 8, or 9 • 0, or wait five seconds) to store the third personal code. 5. The doors will again lock then unlock to confirm programming of the Tips: code. Erasing personal code To erase all of the personal entry codes programmed to a vehicle: 1. Enter the factory-set code. 2. Press and release 1 • 2 within five seconds of step 1. 3. Press and hold 1 • 2 for two seconds. All of the vehicle doors will lock and then unlock to confirm erasure. Unlocking the doors and releasing the trunk with the keyless entry To unlock the driver door, enter either the factory-set code or personal (driver door unlocks) and press 3 • 4 within five seconds. • To release the trunk, enter the factory-set code or personal code (driver door unlocks) and press 5 • 6 within five seconds. After the factory-set code or personal code has been entered, you can • 4) and release the trunk (press 5 • 6) as long as the controls are pressed within five seconds of each other. Locks and Security 83 2011 Crown Victoria (cro) |